Our machine pool is suitable for processing smaller or larger welded pieces or metal constructions up to a weight of 30 tons.
The machines for mechanical processing are regularly maintained, while calibration measurements are carried out on a regular basis which ensures a high and repeatable quality of mechanical processing.
HVRS 125 TOS Varnsdorf
The machine of type WHQ 13.8 CNC, manufactured by TOS Varnsdorf (2007) belongs to machines for quality and high-productive mechanical metal processing.
| Width | 1800 mm |
| Length | 2500 mm |
| X | 3500 mm |
| Y | 2500 mm |
| Z | 1250 mm |
| Max. load | 12 t |
| Control | CNC |
HVRS 130 TOS Varnsdorf
The machine of type WHQ 13.8 CNC, manufactured by TOS Varnsdorf (2014) belongs to machines for quality and high-productive mechanical metal processing.
| Width | 2000 mm |
| Length | 3000 mm |
| X | 5000 mm |
| Y | 3000 mm |
| Z | 16050 mm |
| Max. load | 18 t |
| Control | CNC |
HVRS 125 TOS Varnsdorf
The machine of type WHQ 13.8 CNC, manufactured by TOS Varnsdorf (2014) belongs to machines for quality and high-productive mechanical metal processing.
| Width | 1800 mm |
| Length | 2500 mm |
| X | 3500 mm |
| Y | 2500 mm |
| Z | 1250 mm |
| Max. load | 12 t |
| Control | CNC |
Processing Centre Feeler VBA 100A
The CNC controlled processing centre is used for demanding mechanical processing of various metal elements and products.
| Width | 960 mm |
| Length | 2400 mm |
| X | 2200 mm |
| Y | 1000 mm |
| Z | 800 mm |
| Control | CNC |
| Tool pockets | 32 |
HVRS Portal
The milling machine is aimed at mechanical processing of metal elements, sub-assemblies or final assemblies (product).
| Width | 5500 mm |
| Length | 1600 mm |
| X | 800 mm |
| Y | 2100 mm |
| Z | 5500 mm |
| Max. load | 15 t |
| Control | NC |
HVRS - 220 RUS
The classical milling machine is aimed at mechanical processing of the largest metal assemblies. Its qualities are in particular precision of processing and a large operating range.
| Width | 3600 mm |
| Length | 3600 mm |
| X | 11000 mm |
| Y | 3200 mm |
| Z | 1850 mm |
| Max. load | 30 t |
| Control | NC |
HVRS - 200 ŠKODA
The classical milling machine is aimed at mechanical processing of the largest metal assemblies and products. Its qualities are in particular precision of processing and a large operating range.
| Width | 3600 mm |
| Length | 3600 mm |
| X | 11000 mm |
| Y | 3200 mm |
| Z | 1850 mm |
| Max. load | 30 t |
| Control | NC |
HVRS Portal
The milling machine is aimed at mechanical processing of metal elements, sub-assemblies or final assemblies (product).
| Width | 6000 mm |
| Length | 1600 mm |
| X | 800 mm |
| Y | 2100 mm |
| Z | 6000 mm |
| Max. load | 15 t |
| Control | NC |
HVRS - 125 BOSCH
The CNC controlled milling machine is aimed at mechanical processing of more demanding metal elements, sub-assemblies or smaller metal assemblies.
| Width | 1250 mm |
| Length | 1250 mm |
| X | 2000 mm |
| Y | 1400 mm |
| Z | 1100 mm |
| Max. load | 6 t |
| Control | CNC |
HVRS - 125 RUS
The classical milling machine is aimed at mechanical processing of metal elements, sub-assemblies and metal assemblies.
| Width | 1600 mm |
| Length | 1800 mm |
| X | 1300 mm |
| Y | 1600 mm |
| Z | 1200 mm |
| Max. load | 6 t |
| Control | NC |
HVRS - 130
The classical milling machine is aimed at mechanical processing of metal elements, sub-assemblies and metal assemblies.
| Width | 1500 mm |
| Length | 1700 mm |
| X | 2200 mm |
| Y | 1400 mm |
| Z | 1500 mm |
| Max. load | 8 t |
| Control | NC |
HVRS - BH 130 (optics)
The milling machine is aimed at more demanding processing of sub-assemblies and metal assemblies.
| Width | 1500 mm |
| Length | 1700 mm |
| X | 2200 mm |
| Y | 1400 mm |
| Z | 1500 mm |
| Max. load | 8 t |
| Control | NC |
HVRS - BH 90
The classical milling machine is aimed at mechanical processing of smaller metal elements.
| Width | 920 mm |
| Length | 1000 mm |
| X | 900 mm |
| Y | 1000 mm |
| Z | 750 mm |
| Max. load | 0,9 t |
| Control | NC |
FC 63V Milling Machine
The classical milling machine is aimed at mechanical processing of smaller metal elements.
| Width | 600 mm |
| Length | 2200 mm |
| X | 1500 mm |
| Y | 600 mm |
| Z | 400 mm |
| Max. load | 900 kg |
| Control | NC |
GVK RN Milling Machine
The classical milling machine is aimed at mechanical processing of smaller metal elements.
| Width | 400 mm |
| Length | 1400 mm |
| X | 1200 mm |
| Y | 500 mm |
| Z | 300 mm |
| Max. load | 900 kg |
| Control | NC |
PA-45 Lathe
Applied for milling large and small processed pieces.
| Φ 650 L = 3500 Φ 1300 L = 100 |
|
| Control | NC |
TN-480 Lathe
Applied for milling large and small processed pieces.
| Φ 650 L = 3500 Φ 1300 L = 100 |
|
| Control | NC |
Processing Centre
The CNC controlled processing centre is used for demanding mechanical processing of various metal elements and products.
| Width | 400 mm |
| Length | 1000 mm |
| X | 600 mm |
| Y | 340 mm |
| Z | 450 mm |
| Control | CNC |